Guide
How to move a washing machine safely
Updated
The short answer
Turn it off and unplug it, close the water supply, drain the remaining water through the filter, disconnect the hoses, and refit the transit bolts that came with the machine so the drum can't swing around in the van. Move it upright, and get it plumbed in properly at the new place before running a cycle.
Before the move
- Run nothing in it for a day before, so it's as dry as possible
- Turn off the power at the wall and unplug it
- Turn off the cold water tap that feeds it
- Drain the last of the water through the small filter hatch at the bottom front, with towels and a shallow tray underneath
- Disconnect the inlet and drain hoses, and tape them to the back of the machine
- Tape the door and the detergent drawer shut
The transit bolts
Most front-loading machines came with transit bolts: long bolts that screw into the back and lock the drum in place. They're there to stop the drum bouncing on its springs during transport, which can damage the machine. If you still have them, refit them before the move. If you've lost them, the manufacturer can usually supply a replacement set for your model.
Moving it
Washing machines are heavy and awkward, with no handholds, so they need two people or a trolley. Keep it upright, strap it to the side of the van so it can't tip, and protect the front from scratches.
At the new place
Remove the transit bolts before you use it, or the drum will shake badly on the first spin. Reconnect the hoses, check the floor is level, and run a short empty cycle first to check for leaks. If you're not confident plumbing it in, get a plumber: we move appliances but don't connect them.
Pushing it back into place
Connect the hoses and plug before you slide the machine in, because you won't reach them afterwards. Then push it back slowly and squarely, low down on the front, checking as you go that the hoses aren't kinked or trapped behind it. Leave a few centimetres between the machine and the wall.
If it won't slide, tilt it back slightly and put a piece of cardboard or an old towel under the front feet, or walk it back a corner at a time. Don't lift it on your own. Once it's in, check it with a spirit level and adjust the feet until it doesn't rock, then tighten the lock nuts so it stays level on the spin.
Questions
How do you lift a washing machine?
With two people, or not at all. Tilt it back, grip the bottom edge at the front and the top edge at the back, keep it upright and lift with your legs. For anything more than a few steps, use a sack truck or appliance trolley and strap the machine to it. Much of the weight is a concrete counterweight inside, so it's heavier than it looks.
Can a washing machine be moved lying down?
It's best kept upright. Lying it down can let water left inside get where it shouldn't and puts strain on the drum.
What about a fridge?
Move fridges upright where possible, and let it stand for a few hours at the new place before switching it on, so the system can settle.
